Modular steel railing kits tailored to your requirements, with product and installation support.
What do I need? Shop Guard Rail Kits Rated 4.6/5
1,896 Reviews
Step 01
Use a tape measure to estimate the total length of the area where you want to install the guard rail. For instance, your dimensions are 12', 8', and 10'. Your total length becomes 30'.
Step 02
Divide your total length by 6 ft and round up to get the number of sections. For example, 12 ft needs 2 sections, and 8 ft also needs 2 sections. If you're using 4 ft rails, you can use two 4 ft sections instead for 8 ft.
Trimming is optional but sometimes necessary to make sure your guard rail fits just right.
Option 1 Cut the last section only (gives an asymmetrical finish)
Option 2 Cut each section equally (gives a symmetrical finish)
How to Install the V1 Classic Guard Rail Kit
CR Fence & Rail
Step 01 Install Your Posts Position end posts at the start and end of each run, and add corner posts at 90° turns. Mark post locations, drill with the bits, and secure posts using the provided anchors and screws. Check that each post is level before tightening. Step 02 Assemble a Kit Attach the lower rail between posts. Slide balusters into the lower rail - pre-fitted seals keep them snug. Secure the upper rail with adjustable brackets. Step 03 Connect Multiple Kits Repeat the assembly process for each section kit. Continue connecting kits seamlessly until your entire planned railing area is covered.
CR posts use thick robotic GMAC welds on all 4 sides of the post-to-baseplate connection, providing more metal-to-metal bonding.
CR posts are 3.5 lbs per post, delivering a more robust, heavy-duty foundation for your safety.
CR’s 3¼-inch × 5/16-inch wedge anchors offer secure concrete installation and comply with International Building Code (IBC) standards.
CR complies with IRC R312, which requires guardrail gaps to prevent a 4-inch sphere from passing through, helping protect children from falls.
See our railings in comparison to other brands
A simple, modular system to chain multiple CR railings together to build a complete system.
A 5-layer, matte coating that resists rust, UV rays, and wear while preserving a refined finish.
Formed from thick, corrosion-resistant steel that maintains structural integrity.





































































































